You can easily replace the Catlog Pendant’s belt to accommodate your cat’s growth and body size.
Please refer to the video below for instructions on how to remove and attach the belt. For written instructions, see the text provided after the video.
Jump to the written instructions
Before You Begin
Please prepare the following items:
- Catlog Pendant
- Replacement belt
- Spring bar tool
Instructions
1. Removing the Spring Bar
Hook the Y-shaped end of the spring bar tool into the groove of the spring bar. Gently push the spring bar downward; it will compress and come out of the hole.Please be careful not to lose the spring bar during this step.
Once one end of the spring bar is released, you can remove the belt by hand.
If the spring bar is difficult to compress, try from the opposite side—it may come off more easily.If both sides are stiff, try gently pressing both spring bars a little at a time.Once one side is removed, repeat the same process on the other side.
2. Attaching the New Belt
Insert the spring bar into the hole on the new belt, then insert one end of the spring bar into the hole on the device.
Just like when removing it, hook the spring bar tool into the groove of the spring bar and gently push it into place until it clicks into the hole on the device.
Repeat the same steps for the opposite side of the belt.Once both sides are attached, gently pull on the belt with your hands to ensure it is securely in place. Installation is now complete.